|   |    Like Us on Facebook  Connect us on Google+
Slider Image

Automotive

 
Tyre Tube Valves
Passenger Car Valves
Designed for application on conventional tyres with inner tubes. All Schrader passenger car valves have full length metal insert, rubber covered except at the threaded end where the valve cap is applied. TR 13 valve are normally applied on rims with 11.506 mm (0.453") hole diameter but can adapted with Schrader 996 plastic bushing for application on 15.900 mm (0.626") diameter rim hole normally using TR 15 valves.
Passenger Car Valves
 
Enquire Now
   
Scooter Valves
For application on scooter and trolley wheels and small diameter wheels on wheel barrows. The valves are normally supplied in straight form but can be converted to single bent form by  using Schrader 8876 and 3633A valve converting tool to ensure accurate trouble-free bending.
Scooter Valves
 
Enquire Now
   
Car & Light Truck Valve

(1)PASSENGER CAR VALVES

(2)LIGHT TRUCK VALVE

Car & Light Truck Valve
 
Enquire Now
   
Tubeless Single Bend Swival Valves
These single bend swivel valves have a removable stem with a "O" ring seal. The stem swivels to any convenient position for air service. Hex nut permits wrench tightening to lock stem assembly in position after installation.
 
Enquire Now
   
Extension Stem assembilies for swivel valves
These hand bendable Bundy extensions are available in several standard lengths of single and double bend in 6.350 mm (0.250") increments on request up to 254.000 mm. (10.000") length and 25.400 mm (1.000") increments for longer length extension. Features include simplicity of attachment, adjustable direction and swivel 'O' ring seal. Can be used directly with Schrader 650-197 tubeless spud.
Extension Stem assembilies for swivel valves
 
Enquire Now
   
Tractor Valve
For use on rear tyres of tractors specially designed for adding liquid ballast to tyres for increased traction. Both air as well as liquid is sealed in the tube. The core housing containing the valve core is removed as a complete unit, giving a larger opening for the passage of liquid.
Tractor Valve
 
Enquire Now
   
Rubber Base Convertible Valves
Dubltite convertible truck and bus valves are supplied in straight form but can be converted to single or double bent form by using Schrader 7260 truck valve converting tool. Rubber Base Convertible Valves
 
Enquire Now
   
Interchangeble swivel valves for tubeless or tube type tyres
This spud fits on to 20.650 mm (0.813") tubeless rim hole by the clamp-in rubber grommet sealing method and is used for Schrader 5020 type extensions and Schrader 650/670 series of valve stems. TUBELESS SINGLE BEND SWIVEL VALVES These single bend swivel valves have a removable stem with a "O" ring seal. The stem swivels to any convenient position for air service. Hex nut permits wrench tightening to lock stem assembly in position after installation. Interchangeble swivel valves for tubeless or tube type tyres
 
Enquire Now
   
Convertible screw-on tube type valve
These valves are used on tyre tubes of off-the-road vehicles. The rubber base of the spud is cured with the tube and the valve is screwed on to the threaded portion of the spud Convertible screw-on tube type valve
 
Enquire Now
   
4361 S Shock Strut Valve
For operating pressures up to 3000 P.S.I. conforms to AN-6287-1 4361 S Shock Strut Valve
 
Enquire Now
   
2755 High-Pressure Inflating Connection
Fits .305"-32 thread size with 3/8"-24 UNF thread of a recommended Max Torque of 50 in-lb for 3/16" flare tube fitting. Has core depressor pin and copper sealing washer. Maximum working pressure 3000 P.S.I. 2755 High-Pressure Inflating Connection
 
Enquire Now
   
Light Truck Valves
These valves can be bent by hand, below the valve core chamber to the desired angle. Retains position of initial bend. Bending is done after application to the tube Light Truck Valves
 
Enquire Now
   
Motor Cycle Valves
The Valve finds general application on motor cycle tyre tubes and other light weight vehicles. Motor Cycle Valves
 
Enquire Now
   
Truck & Bus Valve
RUBBER BASE CONVERTIBLE VALVES Dubltite convertible truck and bus valves are supplied in straight form but can be converted to single or double bent form by using Schrader 7260 truck valve converting tool. Truck & Bus Valve
 
Enquire Now
   
Tubeless Non-Swivel Valves
Has a same feature as swivel type valve except that it is a straight non-swivel type valve. The valve indicated above is normally supplied with Schrader 650-197 (TR SP2) spud but without the standard accessories. In case only the stem without spud is to be ordered add suffix '-198' to the Schrader’s Part No. i.e. 670-198
 
Enquire Now
   
 

Automotive

Tyre Tube Valves
Valve Accessories
Valve Extensions
Garage & In-Plant Service
Tubeless Tyre Valves
 
Copyrights @ 2014 Schrader Duncan Limited  |  Email: info@schraderduncan.com Home  |  About us  |  Products  |  Investors  |  Careers  |  Faq  |  Sitemap  |  Contact us